Microscope World

This ACE probe holder has a malleable body with 4" bendable length. It holds probe tips with a 20-mil O.D. and single wire terminates in a Banana Plug / BNC connector. For use with ACE Manipulator...

This ACE probe holder has a malleable body with 4" bendable length. It holds probe tips with a 20-mil O.D. and single wire terminates in a Banana Plug. For use with ACE Manipulator and ACE Probe Tip...

The ACE manipulators are ideal for probing 10-micron targets or larger. Manipulators attach via magnetic base with right hand and left hand options available. For use with ACE series probe holders...

The Vac-Puc is a brass plate insert that sits on top of a chuck and has three small holes in a triangular patter to hold down small flat objects. Vacuum holes: 3 holes Diameter spaced: 0...

1" ruler is numbered 0.0 through 1.0 every .100" division Increments: 0.0" through 1.0" divided into 0.1" increments 0.9" through 1.0" divided into 0.01" increments The last two 0.01" increments...

One scale: 0.0" through 0.800" numbered 0 through 0.8, divided into 0.005" increments Second scale: 20 mm in 200 divisions numbered 0 through 20 divided into 0.1 mm increments Lines: Chrome...

KR-891 Stage micrometer has 2 scales: 50 mm/ 250 divisions (each division = 0.2 mm) and 2"/ 200 divisions (each division = 0.01") Lines: Chrome deposition Tolerances: +/-0.0002" or 0.005...

Increments 0.0" through 1.00" divided into 0.100" increments 0.9" through 1.00" divided into 0.010" increments The last two 0.010" increments are divided into 0.001" increments Lines: Chrome...

This E-arm microscope focus holder is designed for use with digital microscopes and has a 32mm diameter hole for mounting onto a stand. This focus holder has coarse focusing. The N adapter is used to...