Hardness Tester Accessories

Hardness tester accessories include indenters, Vickers test blocks, specimen holders, wire holders, Rockwell test blocks and anvils.

Add Wish List

Add to Cart The item has been added

Mitutoyo V-Anvil Small Outside Diameter 40mm

This Mitutoyo v-anvil is for use with the Rockwell hardness testing machines. Diameter 1.5" (38mm) Groove width 0.38" (9.7mm) For shaft materials max ⌀8.4mm Mitutoyo part # 810-041 NOTE: This item is not returnable.

MSRP:

$248.00

Add to Cart The item has been added

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo V-Anvil Outside Diameter 10mm

This Mitutoyo v-anvil is for use with the Rockwell hardness testing machines. Diameter 0.38" (9.7mm) For Round Specimens max ⌀ 10mm Groove width 0.38" (9.7mm) Mitutoyo part # 810-042 NOTE: This item is not returnable.

MSRP:

$236.00

Add to Cart The item has been added

Compare
Add Wish List

Choose Options

Calibration Block for Leeb Hardness Tester

This calibration block is designed to be used with the Leeb Hardness Tester HH-V400. Four different standards are available. Select the desired one when ordering for the following list: 64HAA467: 520 HLD range Leeb hardness standard 64HAA468: 630 HLD...

MSRP:

$1,004.00

Choose Options

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo Ball Indenter

This Mitutoyo ball indenters is intended for use with the Vicker's Hardness testing machines. Tungsten-Carbide Composite Indenter, 2mm Diameter. Mitutoyo Part# 11AAD470 NOTE: This item is not returnable.

MSRP:

$391.00

Add to Cart The item has been added

Compare
Add Wish List

Choose Options

Support Ring for Mitutoyo Hardness Tester HH-V400

The support ring is designed for use with the Mitutoyo hardness tester HH-V400 with Detectors D and DC. Four sizes are available. Choose from the following options when ordering: 19BAA248: Designed for use with convex cylindrical surfaces R10 -...

MSRP:

$42.00 - $63.00

Choose Options

Compare
Add Wish List

Add to Cart The item has been added

DC Detector Unit for Portable Hardness Tester HH-V400

This DC Detector unit is for use with Mitutoyo HH-V400 portable hardness tester. This DC detector is useful when measuring hardness in narrow spaces such as the inside of pipes. Size Ø18 x 86mm Tip Width 22mm NOTE: This is an accessory for the...

MSRP:

$3,173.00

Add to Cart The item has been added

Compare
Add Wish List

Choose Options

Mitutoyo Vickers Hardness Tester Wire Holder

Mitutoyo Vickers hardness tester specimen wire holder. Used to horizontally or vertically secure a wire of needle specimen that has a diamter of 0.126" (3.2mm) or less. Options include: Horizontal (810-014-1) Vertical (810-015-1) NOTE: This item is not...

MSRP:

$523.00 - $972.00

Choose Options

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo Vickers Hardness Tester Thin Plate Holder

Mitutoyo Vickers hardness tester specimen thin plate holder. Secures a plate with a thickness of 0.197" (5mm) or less, or foil-like specimens. Mitutoyo part #810-013 NOTE: This item is not returnable.

MSRP:

$654.00

Add to Cart The item has been added

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo Vickers Hardness Tester Round Table

Mitutoyo Vickers hardness tester round table. Dimensions 7.08" (180mm) Mitutoyo part #: 810-037 NOTE: This item is not returnable.

MSRP:

$1,210.00

Add to Cart The item has been added

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo Vickers Hardness Tester Rotary Table

Mitutoyo Vickers hardness tester rotary table. Mitutoyo part #810-018. NOTE: This item is not returnable.

MSRP:

$1,830.00

Add to Cart The item has been added

Compare
Add Wish List

Choose Options

Mitutoyo Vickers Hardness Tester Mounted Specimen Vice

Mitutoyo Vickers Hardness tester mounted specimen vise. This vise allows for a max height of 1.5" (39mm). Select from several options for diameter: 1" (25.4mm) Diameter (810-650-1) 30mm Diameter (810-650-2) 1.25" (31.75mm) Diameter (810-650-3) 1.5" (38...

MSRP:

$2,194.00

Choose Options

Compare
Add Wish List

Choose Options

Mitutoyo Vickers Hardness Tester Clamping Vices

Mitutoyo clamping devices (vices) for the Vickers hardness testers. Two options are available, select when ordering. 100mm (3.94") maximum opening (810-017) 51mm (2") maximum opening (810-016) NOTE: This item is not returnable.

MSRP:

$1,370.00 - $2,065.00

Choose Options

Compare

Items 1 to 12 of 31 total

1
2
3

PRE-SALES

If you have any questions before making a purchase chat with our online operators to get more information.

or find our Questions & Answers

AFTER-SALES

If you have need any help about the After-Sales issues, please contact us.

Aurox
Cargille
Excelitas
Fein Optic
Hausser Scientific
Innopsys
Inspectis
Jenoptik
Lumencor
Meiji Techno
Metkon
Microscope World
Mitutoyo
Motic
Mountz
National Optical
Navitar
Opto
PAXcam
PCO
Prior Scientific
Richter Optica
Schott
Swift
Techniquip
WDI Wise Device Inc
Zeiss