Metallurgical Sample Preparation Mounting

Metallurgical sample preparation mounting press systems are available with programmable software. A wide selection of mould assemblies from 25-50mm diameter are available. Supplies for both hot and cold mounting machines are available.

Mounting Press Systems

3 products

Metallurgical Sample Prep Mounting Supplies

17 products

Add Wish List

Metkon DAP Hot Mounting Resin

Metkon DAP hot mounting resin is a green diallyphtalat powder designed for the examination of the edges of a surface. It can be used to look at coatings, deposits, and thermal treatments. Description: Diallyphtalat powder Quantity, select when...

Compare
Add Wish List

Metkon EPO Hot Mounting Resin

Metkon EPO is a hard, black epoxy resin designed for the examination of the edges of a surface. It has very low shrinkage. Description: Hard, black epoxy Quantity, select when ordering: 1 kg or 10kg Metkon Part #s 29-011 and 29-011/10 NOTE: This item...

Compare
Add Wish List

Metkon BAK-R Hot Mounting Resin

Metkon BAK-B hot mounting resin is a red phenolic powder designed for the standard examination of all materials. It has low shrinkage and can be heated up to 180º C. Description: Red phenolic powder Quantity, select when ordering: 1 kg, 10kg, or 20...

Compare
Add Wish List

Metkon EPOCOLD Epoxy Resin for Cold Mounting 6 hour Cure

Cold mounting is the preferred method for preparing samples that are sensitive to damage from heat and pressure such as coatings and PCB. EPOCOLD Epoxy cold mounting resin has low shrinkage and moderate hardness. The product consists of resin and...

Compare
Add Wish List

Metkon DMT ACE Acrylic Cold Mounting Resin

This product includes Metkon DMT ACE acrylic powder and fluid for creating an acetone-soluble cold mounting resin. The resin is created by mixing two parts resin powder with one part liquid hardener. Compounds used to create DMT ACE: Powder and fluid,...

Compare
Add Wish List

Metkon DMT CON Acrylic Mounting Resin

This product includes Metkon DMT CON powder and fluid for creating a conductive cold mounting resin. This resin is created by mixing one part resin powder with one part liquid hardener. Compounds used to create DMT CON: Powder and fluid, 1:1...

Compare
Add Wish List

Metkon EPOCOLD Epoxy Resin for Cold Mounting 2 hour Cure

Cold mounting is the preferred method for preparing samples that are sensitive to damage from heat and pressure such as coatings and PCB. EPOCOLD Epoxy cold mounting resin has low shrinkage and moderate hardness. The product consists of resin and...

Compare
Add Wish List

Metkon SMOOTH Mould Release

Metkon SMOOTH mould release spray can is an anti adherent to get moulds to release the mount. Description: Anti adherent mould release. Quantity: 400ml Metkon Part #s 29-099 NOTE: This item is not returnable.

Compare