Metallurgical Sample Preparation Cold Mounting Supplies

Cold mounting is preferred for samples which are sensitive to damage from heat and pressure (coatings, PCB, etc.) Cold mounting resins are easy to use.

Add Wish List

Metkon Embedding Forms for Cold Mounting for MICRADEPTH / MICRADEPTH-A Samples

These embedding forms are to be used to prepare samples via cold mounting for MICRADEPTH / MICRADEPTH-A. Select when ordering from a Ø30 mm or a Ø40 mm embedding form for mounts with a flange...

Compare
Add Wish List

Metkon DMT 20 Acrylic Cold Mounting Resin

This product includes Metkon DMT 20 powder and fluid for creating a cold mounting resin. This resin is created by mixing 2 parts resin powder with one part liquid hardener. Compounds used to...

Compare
Add Wish List

Metkon DMT 35 Cold Mounting Resin

This product includes Metkon DMT 35 powder and fluid for creating a cold mounting resin. The resin is created by mixing with 2 parts resin powder with one part liquid hardener. Compounds used to...

Compare
Add Wish List

Metkon DMT ACE Acrylic Cold Mounting Resin

This product includes Metkon DMT ACE acrylic powder and fluid for creating an acetone-soluble cold mounting resin. The resin is created by mixing two parts resin powder with one part liquid hardener...

Compare
Add Wish List

Metkon DMT CON Acrylic Mounting Resin

This product includes Metkon DMT CON powder and fluid for creating a conductive cold mounting resin. This resin is created by mixing one part resin powder with one part liquid hardener. Compounds...

Compare