Hardness Tester Accessories

Hardness tester accessories include indenters, Vickers test blocks, specimen holders, wire holders, Rockwell test blocks and anvils.

Add Wish List

Choose Options

Mitutoyo Tungsten Carbide Ball Indenters

These carbide ball indenters are for use with the Rockwell and Rockwell Superficial type hardness testing machines. Select from the options below when ordering: 1/16" Tungsten Carbide Ball Indenter (11AAD465) 1/4" Carbide Ball Indenter...

MSRP:

$433.00 - $456.00

Choose Options

Compare
Add Wish List

Choose Options

Mitutoyo Steel Ball Indenters

These steel ball indenters are for use with the Mitutoyo Rockwell and Rockwell Superficial type hardness testing machines. Select from the options below: 1/16" Diameter Steel Ball Indenter (64HAA118) 1/8" Diameter Steel Ball Indenter (64HAA121) 1/4"...

MSRP:

$248.00 - $494.00

Choose Options

Compare
Add Wish List

Choose Options

Mitutoyo Steel Ball

Mitutoyo replacement steel ball for steel ball indenters used with Rockwell hardness testing machines. Several options are available: 1/16" Diameter Spare Steel Ball, 100 pieces (64HAA130) 1/8" Diameter Spare Steel Ball, 100 pieces (64HAA132) 1/4"...

MSRP:

$20.00 - $187.00

Choose Options

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo Spot Anvil Diamond Tipped

This Mitutoyo spot anvil is for use with the Rockwell hardness testing machines. Diamond-tipped type for Rockwell superficial hardness measurement. Mitutoyo part # 810-030 NOTE: This item is not returnable.

MSRP:

$4,002.00

Add to Cart The item has been added

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo Spot Anvil

This Mitutoyo spot anvil is for use with the Rockwell hardness testing machines. Diameter = 0.25" (6.4mm) Mitutoyo part # 810-044 NOTE: This item is not returnable.

MSRP:

$216.00

Add to Cart The item has been added

Compare
Add Wish List

Choose Options

Mitutoyo Hardness Tester Manual XY Stage

This manual XY travel stage for the Mitutoyo hardness testers is available in metric or inches. Select from the following options: 50mm x 50mm XY Stage (810-423) 2" x 2" XY Stage (810-427) NOTE: This item is not returnable.

MSRP:

$2,782.00

Choose Options

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo Flat Anvil

This Mitutoyo flat anvil is for use with the Rockwell hardness testing machines. Diameter = 2.5" (64mm) Mitutoyo part # 810-039 NOTE: This item is not returnable.

MSRP:

$293.00

Add to Cart The item has been added

Compare
Add Wish List

Choose Options

Mitutoyo Diamond Indenters

The Mitutoyo indenters are for use with the Mitutoyo Vickers hardness testing machines. The following diamond indenters are available (select when ordering). Diamond Indenter, HV, AVK-C Series, Vickers (19BAA060) Diamond Indenter, Knoop (19BAA063) H, HM...

MSRP:

$1,063.00 - $2,515.00

Choose Options

Compare
Add Wish List

Choose Options

Mitutoyo Carbide Ball

Mitutoyo carbide ball for replacement in the carbide ball indenters used with Rockwell hardness testing machines. Select from the options below: 1/16" Cabide Ball (19BAA507) 1/8" Carbide Ball (19BAA508) 1/4" Carbide Ball (19BAA509) 1/2" Carbide Ball...

MSRP:

$67.00 - $338.00

Choose Options

Compare
Add Wish List

Choose Options

Mitutoyo Carbide Alloy Ball

Mitutoyo carbide-alloy ball, for use with the Mitutoyo Carbide Alloy Indenter. Two sizes are available, select when ordering. 1mm Diameter (19BAA281) 2.5mm Diameter (19BAA283) NOTE: This item is not returnable.

MSRP:

$29.00 - $41.00

Choose Options

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo Adjustable Support for V-Anvil

This Mitutoyo adjustable support is used to mount a v-anvil for use with the Rockwell hardness testing machines. Adjustable Height = 13-18.5" (330-470mm) Mitutoyo part # 810-028 NOTE: This item is not returnable.

MSRP:

$4,419.00

Add to Cart The item has been added

Compare
Add Wish List

Add to Cart The item has been added

Mitutoyo Vickers Hardness Tester Specimen Holder

Mitutoyo Vickers hardness tester universal specimen holder is used to secure a specimen that has a measuring surface that is hard to stabilize, perpendicular to the indenter axis. Mitutoyo part #810-020. NOTE: This item is not returnable.

MSRP:

$1,135.00

Add to Cart The item has been added

Compare