Mitutoyo Digimatic V-Anvil Micrometer 0.05-0.6" / 1.27-15.24mm

This Mitutoyo digimatic V-anvil micrometer measures the outside diameter of cutting tools (e.g. taps, reamers, and end mills) with an odd number of flutes for 3 flutes cutting head. Has a centerline groove for measuring pitch diameters of taps, which have a small diameter, by using a single-wire method. Supplied with setting standard, ratchet stop for constant force, an SPC output, and has a non-slip grip finish.

Contact Microscope World for information on having this instrument calibrated.

• Range = 0.05 - 0.6" / 1.27 - 15.24mm
• Accuracy = +/- 0.0002"
• Setting standard = ø.2"
• Resolution = .00005" / 0.001mm
• Spindle face = Carbide tipped
• Flatness (spindle/anvil) = .000012" / 0.3µm, .00004" / 1µm
• Data Output = Yes, SPC cable with data switch is available
• Display = LCD
• Battery = SR44, battery life approximately 2.4 years under normal use
• Functions = zero/ABS, data hold, preset, inch/mm conversion (on inch/metric models only), function lock, low voltage alarm, counting value composition error alarm.
• Case = includes fitted plastic case.

Mitutoyo Part # = 314-351-30
NOTE: This item is not returnable.