Metallurgical Sample Preparation Hot Mounting Supplies

The most important properties of hot mounting compounds are hardness, shrinkage, and viscosity. The hardness of the compound should match the hardness of the specimen in order to avoid uneven abrasion during grinding. If the shrinkage during curing is large, a gap between the specimen and the mount will occur and edge will not be adequately protected. Viscosity is important to reach to all areas.

Add Wish List

Metkon BAK-B Hot Mounting Resin

Metkon BAK-B hot mounting resin is a black phenolic powder designed for the standard examination of all materials. It has low shrinkage and can be heated up to 180º C. Description: Black phenolic powder Quantity, select when ordering: 1 kg, 10kg, or...

Compare
Add Wish List

Metkon NET Hot Mounting Resin

Metkon NET hot mounting resin is a transparent acrylic powder designed for the standard examination of all materials. It is perfectly transparent. Description: transparent acrylic powder. Quantity, select when ordering: 1 kg or 10kg Metkon Part...

Compare
Add Wish List

Metkon CON Hot Mounting Resin

Metkon CON hot mounting resin is a conductive bakelite powder designed for the SEM examination of all materials. Description: Conductive bakelite powder Quantity: 0.5 kg Metkon Part # 29-013 NOTE: This item is not returnable.

Compare
Add Wish List

Metkon Mold Assembly With Intermediate Ram for ECOPRESS

The Metkon ECOPRESS 52, 102, and 202 mounting presses can use mold assemblies with various diameters. All mold assemblies have an intermediate ram so that 2 samples can be processed at a time. Mold assemblies with the following diameters are available:...

Compare
Add Wish List

Metkon DAP Hot Mounting Resin

Metkon DAP hot mounting resin is a green diallyphtalat powder designed for the examination of the edges of a surface. It can be used to look at coatings, deposits, and thermal treatments. Description: Diallyphtalat powder Quantity, select when...

Compare
Add Wish List

Metkon EPO Hot Mounting Resin

Metkon EPO is a hard, black epoxy resin designed for the examination of the edges of a surface. It has very low shrinkage. Description: Hard, black epoxy Quantity, select when ordering: 1 kg or 10kg Metkon Part #s 29-011 and 29-011/10 NOTE: This item...

Compare
Add Wish List

Metkon BAK-R Hot Mounting Resin

Metkon BAK-B hot mounting resin is a red phenolic powder designed for the standard examination of all materials. It has low shrinkage and can be heated up to 180º C. Description: Red phenolic powder Quantity, select when ordering: 1 kg, 10kg, or 20...

Compare
Add Wish List

Metkon SMOOTH Mould Release

Metkon SMOOTH mould release spray can is an anti adherent to get moulds to release the mount. Description: Anti adherent mould release. Quantity: 400ml Metkon Part #s 29-099 NOTE: This item is not returnable.

Compare