Metkon EPOCOLD Epoxy Resin for Cold Mounting 6 hour Cure

Cold mounting is the preferred method for preparing samples that are sensitive to damage from heat and pressure such as coatings and PCB. EPOCOLD Epoxy cold mounting resin has low shrinkage and moderate hardness. The product consists of resin and hardener, which are to be used in a ratio of 4 parts resin to 1 part hardener. Choose from 2 different of quantities of resin and hardener when ordering.

• Resin: EPOCOLD-R6 epoxy resin, choose from 32 ounces or 1 gallon
• Hardener: EPOCOLD-H6 epoxy hardener, choose from 8 ounces or 32 ounces
• Curing time: 6 hours
• Color: Clear, transparent

Metkon Part #s 29-506R and 29-506H or 29-506R-1G and 29-506H-32oz