Metkon DIMOS Diamond Cutting Wheels for Ferrous and Non-ferrous Alloys

These Metkon DIMOS diamond cutting wheels are for use with MICRACUT.  These diamond cutting wheels are for general use with ferrous and non-ferrous alloys.

• Diameters Available (select when ordering): 101.1mm (for MICRACUT 152), 127mm (for MICRACUT 152), 152mm (for MICRACUT 152), and 203mm (for MICRACUT 200-S/ 202)
• Bond: Metal Bonded
• Arbor: 12.7mm
• Thickness: 101.1mm = 0.35mm, 127mm = 0.4mm, 152mm = 0.5mm, 203mm = 0.81mm
• Diamond Layer's Dep (X):  101.1mm = 4mm, 127mm = 4mm,  152mm = 4mm, 203 mm = 5mm
• Diamond Size / Concentration: Medium / High
• Grain Size (Mesh): 150
• Recommended for Cutting: General use with ferrous and non-ferrous alloys: copper, aluminum, metal matrix composites, PCB boards, thermal spray coatings, and titanium alloy.

Metkon Part #s 19-100 (101.1mm), 19-125 (127mm), 19-150 (152mm), and 19-200 (203mm).

NOTE: This item is not returnable.

Here is a guide for selecting the appropriate cut-off wheel for your application.