Steel Setting Rings

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 1mm Dimensions  ØD 20mm T 4mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 1.75mm Dimensions  ØD 25mm T 5mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 1.4mm Dimensions  ØD 20mm T 4mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 1.3mm Dimensions  ØD 20mm T 4mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 1.2mm Dimensions  ØD 20mm T...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 1.1mm Dimensions  ØD 20mm T 4mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 0.8" Dimensions  ØD 45mm T 10mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 0.7" Dimensions  ØD 45mm T 10mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 0.65" Dimensions  ØD 45mm T 10mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 0.5" Dimensions  ØD 32mm T 10mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 0.425" Dimensions  ØD 32mm T 10mm Type...

This steel setting ring is used to accurately and quickly set inside micrometers, dial gages and Holtest. If the setting ring is used properly, it can be used for calibration.  Nominal size 0.35" Dimensions  ØD 32mm T 10mm Type...