Square Gage Block Accessories

This plain jaw is to be used with Mitutoyo square gage blocks. This jaw may be used to measure the inside or outside diameter of an object. The dimensions are shown in the second image above. NOTE: This item is not returnable. Mitutoyo Part # 619072

This plain jaw is to be used with Mitutoyo square gage blocks. This jaw may be used to measure the inside or outside diameter of an object. The dimensions are shown in the second image above. NOTE: This item is not returnable. Mitutoyo Part # 619072

This half round jaw is to be used with Mitutoyo square gage blocks. This jaw may be used to measure the inside or outside diameter of an object. The dimensions are as follows (refer to labeled diagram): R = 4.95mm L= 5mm W= 39.9mm H = 10.3mm NOTE:...

This half round jaw is to be used with Mitutoyo square gage blocks. This jaw may be used to measure the inside or outside diameter of an object. The dimensions are as follows (refer to labeled diagram): R = 1.95mm L = 2mm W = 33.6mm H = 5.3mm NOTE:...

This half round jaw is to be used with Mitutoyo square gage blocks. This jaw may be used to measure the inside or outside diameter of an object. The dimensions are as follows (refer to labeled diagram): R = 0.248" L = 0.25" W = 39.9mm H = 10...

This half round jaw is to be used with Mitutoyo square gage blocks. This jaw may be used to measure the inside or outside diameter of an object. The dimensions are as follows (refer to labeled diagram): R = 0.123" L = 0.125" W = 33.6mm H = 5...

This center point is to be used with Mitutoyo square gage blocks and may be used to scribe a workpiece. The dimensions are shown in the second image above. NOTE: This item is not returnable. Mitutoyo Part # 619073

This center point is to be used with Mitutoyo square gage blocks and may be used to scribe a workpiece. The dimensions are shown in the second image above. NOTE: This item is not returnable. Mitutoyo Part # 619053

This base is to be used as a clamp with a Mitutoyo square gage block by inserting it into the center hole of a square gage block. The dimensions are shown in the second image above. NOTE: This item is not returnable. Mitutoyo Part # 619074