Your shopping cart is currently empty.
Ground US Continental Orders Over $200. Canada call for ship cost.
ZEISS Axiocam 705 POL R2 Microscope Camera
SKU:
426560-9071-000
Price: $10,953.00
SKU:
426560-9071-000-MWSM2
Price: $11,178.00
SKU:
426560-9071-000-MWSM2-NIST
Price: $11,503.00
SKU:
426560-9071-000-MA285
Price: $11,073.00
SKU:
426560-9071-000-MA285-NIST
Price: $11,398.00
ZEISS Axiocam 705 POL R2 Microscope Camera
The ZEISS Axiocam 705 POL R2 is a 5mp microscope camera for single shot polarization imaging. The camera is equipped with a polarization filter mask enhanced sensor allowing you to simutaneously acquire polarization effects without needing to adjust an analyzer. The polarized sensor generates a raw image with four polarization directions (0º, 45º, 90º or 135º) all in one image. This camera is ideally suited for Kerr microscopy, mineralogy, materials research, material discrimination, glass and transparent materials, and live cell imaging.
View a chart comparing the ZEISS microscope cameras here.
- Features:
- Sony CMOS image monochrome sensor microscope camera, 5 megapixels
- Sensor size of 2/3" (diagonal 11mm)
- Pixel size 3.45µm x 3.45µm
- On chip polarization filter with 0º, 45º, 90º or 135º transmission directions in 2x2 pixel arrangement.
- Spectral Range with protection glass approx. 350nm - 1000nm
- USB 3 (can be used with USB 2.0 with reduced frame rate)
- Live image of 25fps at 2464 x 2056 (5mp)
- Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600.
- Size: 10.8 cm x 7.8 cm x 5.1 cm (4.3" x 3.1" x 2")
- CE certified
- Software:
- Supports ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher
- Supports ZEN core 3.5 (Hotfix 3.5.4) or higher
- The required application software is available via the ZEISS Download center.
- Software Calibration: If you plan to make measurements using the software you will need to calibrate the microscope. Calibrating your software with the microscope requires use of a stage micrometer. When ordering please select this option if you do not already have a stage micrometer. There are two stage micrometers recommended:
- Stereo microscope stage micrometer is a dual ruler with 1" equally spaced and numbered 0-10 as well as 25mm equally spaced and numbered 0-25. If NIST certification is selected 10 points in total will be certified. Please note that NIST certification takes approximately 2 weeks.
- Compound microscope stage micrometer is 1mm / 100 divisions. If NIST certification is selected 10 points will be certified. Please note that NIST certification takes approximately 2 weeks.
- Stereo microscope stage micrometer is a dual ruler with 1" equally spaced and numbered 0-10 as well as 25mm equally spaced and numbered 0-25. If NIST certification is selected 10 points in total will be certified. Please note that NIST certification takes approximately 2 weeks.