Mitutoyo Digimatic Micrometer Head Non-Rotating Flat Spindle Face IP65 0-1"

This Mitutoyo digimatic micrometer head has a non-rotating device that provides no radial torsion on the work piece surface. It features a flat  spindle face and is IP65 protected from dust and water. Error proof readings are achieved with the digital LCD display.

Contact Microscope World for information on having this instrument calibrated.

• Range = 0-1"
• Accuracy = +/- 0.001"
• Resolution = 0.00005" / 0.001mm
  
• Stem diameter = 0.5"
• Stem type = Plain
  
• Stem bushing = 18mm
• Measuring force = 5-10N
  
• Spindle face = Flat
• Protection = IP65
  
• Data Output = Yes, use water resistant SPC cable with data switch.
  
• Display = LCD
  
• Battery = SR44, battery life approximately 2 year under normal use.
• Functions = inch/mm conversion, data output, function lock, 2 presets, low voltage alarm, counting value composition error alarm.

For a complete digimatic system, an SPC cable with data switch is required for each micrometer head and the MIG-2USB interface unit is required for measurement data readouts to a PC.

Mitutoyo Part # = 350-361-30
NOTE: This item is not returnable.